Definitions for burn-in
burn-in

WikipediaRate this definition:0.0 / 0 votes

1. Burn-in

   Burn-in is the process by which components of a system are exercised before being placed in service (and often, before the system being completely assembled from those components). This testing process will force certain failures to occur under supervised conditions so an understanding of load capacity of the product can be established. The intention is to detect those particular components that would fail as a result of the initial, high-failure rate portion of the bathtub curve of component reliability. If the burn-in period is made sufficiently long (and, perhaps, artificially stressful), the system can then be trusted to be mostly free of further early failures once the burn-in process is complete. Theoretically, any weak components would fail during the "Burn In" time allowing those parts to be replaced. Replacing the weak components would prevent premature failure, infant mortality failure, or other latent defects. When the equivalent lifetime of the stress is extended into the increasing part of the bathtub-like failure-rate curve, the effect of the burn-in is a reduction of product lifetime. In a mature production it is not easy to determine whether there is a decreasing failure rate. To determine the failure time distribution for a very low percentage of the production, one would have to destroy a very large number of devices. By stressing all devices for a certain burn-in time the devices with the highest failure rate fail first and can be taken out of the cohort. Thus by applying a burn-in, early in-use system failures can be avoided at the expense (tradeoff) of a reduced yield caused by the burn-in process. When possible, it is better to eliminate the root cause of early failures than doing a burn-in. Because of this, a process that initially uses burn-in may eventually phase it out as the various root causes for failures are identified and eliminated. For electronic components, burn-in is frequently conducted at elevated temperature and perhaps elevated voltage. This process may also be called heat soaking. The components may be under continuous test or simply tested at the end of the burn-in period. There is another use of the term by some audiophiles, who leave new audio equipment turned on for multiple days or weeks, to get the components to achieve optimal performance. However, many debates have arisen about the benefits of this practice.

WikidataRate this definition:0.0 / 0 votes

1. Burn-in

   Burn-in is the process by which components of a system are exercised prior to being placed in service. The intention is to detect those particular components that would fail as a result of the initial, high-failure rate portion of the bathtub curve of component reliability. If the burn-in period is made sufficiently long, the system can then be trusted to be mostly free of further early failures once the burn-in process is complete. By stressing all devices for a certain burn-in time the devices with the highest failure rate fail first and can be taken out of the cohort. Thus by applying a burn-in, early in-use system failures can be avoided at the expense of a reduced yield caused by the burn-in process. When the equivalent lifetime of the stress is extended into the increasing part of the bathtub-like failure-rate curve, the effect of the burn-in is a reduction of product lifetime. In a mature production it is not easy to determine whether there is a decreasing failure rate. To determine the failure time distribution for a very low percentage of the production, one would have to destroy a very large number of devices.

How to pronounce burn-in?

1. Alex

   US English

   David

   US English

   Mark

   US English

   Daniel

   British

   Libby

   British

   Mia

   British

   Karen

   Australian

   Hayley

   Australian

   Natasha

   Australian

   Veena

   Indian

   Priya

   Indian

   Neerja

   Indian

   Zira

   US English

   Oliver

   British

   Wendy

   British

   Fred

   US English

   Tessa

   South African

How to say burn-in in sign language?

Numerology

1. Chaldean Numerology

   The numerical value of burn-in in Chaldean Numerology is: 3

2. Pythagorean Numerology

   The numerical value of burn-in in Pythagorean Numerology is: 6

Examples of burn-in in a Sentence

1. Ana Estevez:

   I hope you relive the image of murdering my baby every day of your insignificant life, may your dark soul burn in eternal hell.

2. Timothy Ingalsbee:

   We need to be stopping fires from spreading toward human assets like homes, and steering fires into backcountry wild lands that we want to burn in order to reduce fuel loads or restore fire-dependent species habitat, most of the small fires that we are able to put out are ones that we need to work with.

3. James Clyburn:

   What I try to do is demonstrate by precept and example how we are to proceed as a party, when I spoke out against sloganeering, like ‘ burn, baby, burn ’ in the 1960s and ‘ defund the police,' which I think is cutting the throats of the party, I know exactly where my constituents are. They are against that, and I ’m against that. The House majority whip, who has repeatedly voiced concerns against calls to reduce police funding, made similar comments in November when he told Axios that Democrats struggled in the 2020 elections.

4. Shriekback, "Cradle Song":

   May you never know hunger May you love with a full heart The light burn in your eyes May the fire be your friend And the sea rock you gently May the moon light your way Till the wind sets you free

5. Hugh Wynne:

   We expect coal-to-gas switching to drive an increase in utility gas burn in 2015 of about 1.8 bcfd.

References

1. ^ Wikipedia
   https://en.wikipedia.org/wiki/Burn-in
2. ^ Wikidata
   https://www.wikidata.org/w/index.php?search=burn-in